The KT-832 and KT-836-A are two duct cleaning machines that use flexible-shaft brush cleaning. Their main differences lie in applicable duct diameter and equipment configuration. The KT-832 is suitable for 50–200 mm small-diameter fresh air ducts, while the KT-836-A is suitable for 100–800 mm central air conditioning branch ducts and other small-to-medium ventilation ducts.
The KT-832 uses a compact flexible-shaft cleaning configuration and is suitable for small-diameter duct cleaning. The KT-836-A integrates flexible-shaft brush cleaning, vacuuming, and 1080P video monitoring, making it more suitable for projects with a wider duct diameter range and requirements for cleaning process observation and documentation.
For equipment purchasers, professional cleaning service providers, and engineering companies that handle both fresh air duct cleaning and central air conditioning duct cleaning, the appropriate model can be selected based on actual project duct diameters and functional requirements.
1. KT-832 vs KT-836-A Product Parameter Comparison
|
Parameter |
||
|
Applicable Duct Diameter |
50–200 mm |
100–800 mm |
|
Flexible Shaft Length |
15 m |
15 m |
|
Flexible Shaft Diameter |
6 mm |
Subject to equipment configuration |
|
Main Unit Power |
1700W |
2900W |
|
Maximum Airflow |
1000 m³/h |
2000 m³/h |
|
Speed Range |
0–1400 rpm |
0–1000 rpm |
|
Speed Control Method |
Stepless speed control |
Stepless speed control |
|
Rotation Direction |
Forward, reverse |
Forward, reverse |
|
Cleaning Method |
Flexible-shaft brush cleaning |
Flexible-shaft brush cleaning |
|
Vacuuming Function |
Supported |
Integrated cleaning and vacuuming |
|
Video Monitoring |
No |
1080P video monitoring |
|
Video Recording |
No |
Supports video recording and photo capture |
|
Net Weight |
34 kg |
45 kg |
Note: KT-836-A power and airflow data are based on current documentation. Specific values should be subject to the nameplate and configuration list of the actual purchased version.
2. KT-832 Fresh Air Duct Cleaning Machine Product Introduction
The KT-832 is a flexible-shaft cleaning machine designed specifically for small-diameter fresh air duct cleaning, with an applicable duct diameter of 50–200 mm.
The machine uses a motor to drive a flexible shaft to rotate, and a brush installed at the front of the flexible shaft cleans the inner duct walls. Operators can select suitable brushes and speeds based on internal duct dimensions, configuration, and dust accumulation.
Main Features
1. Suitable for small-diameter fresh air ducts
Applicable duct diameter: 50–200 mm. Primarily designed for fresh air system duct cleaning in residential buildings, commercial buildings, and other locations.
2. 15 m flexible shaft configuration
Equipped with a 15 m flexible shaft, allowing entry into ducts with suitable configurations for cleaning. Actual effective working distance depends on duct bends, resistance, and on-site operating conditions.
3. Stepless speed control and forward/reverse rotation
Speed range: 0–1400 rpm. Supports forward and reverse rotation, allowing working conditions to be adjusted based on internal contamination and brush type.
4. Multiple operating functions
Supports cleaning, vacuuming, and air blowing functions. Corresponding accessories can be configured based on project requirements.
5. Manual and remote control
Supports manual and remote control methods, facilitating on-site control by personnel based on actual working conditions.
KT-832 Main Technical Parameters
|
Technical Item |
Parameter |
|
Product Model |
KT-832 |
|
Applicable Duct Diameter |
50–200 mm |
|
Power Supply |
220V/50Hz |
|
Main Unit Power |
1700W |
|
Flexible Shaft Length |
15 m |
|
Flexible Shaft Diameter |
6 mm |
|
Speed Range |
0–1400 rpm |
|
Maximum Airflow |
1000 m³/h |
|
Rotation Direction |
Forward, reverse |
|
Dimensions |
720 × 320 × 1000 mm |
|
Equipment Weight |
34 kg |
KT-832 Application Scope
Residential fresh air system duct cleaning.
Small-diameter fresh air duct cleaning in commercial buildings.
Office building fresh air duct maintenance.
Small-diameter round ducts suitable for flexible-shaft brush entry.
Specific cleaning scope should be confirmed based on internal duct dimensions, bends, tees, and other structures.
3. KT-836-A Integrated Duct Cleaning and Vacuuming Machine Product Introduction
The KT-836-A is a flexible-shaft cleaning machine suitable for 100–800 mm ducts. It integrates brush cleaning, vacuuming, and video monitoring, primarily designed for central air conditioning branch ducts and other small-to-medium ventilation duct cleaning projects.
The machine uses a flexible shaft to drive a brush to rotate and clean the inner duct walls, while a vacuum system collects dust generated during cleaning. Through the video monitoring system, operators can observe internal duct conditions and assist in completing cleaning operations.
Main Features
1. Wider applicable duct diameter range
Applicable duct diameter: 100–800 mm. Suitable for cleaning central air conditioning branch ducts of different sizes. Corresponding brushes and accessories can be configured based on duct shape and internal structure.
2. Integrated cleaning and vacuuming
The flexible-shaft brush cleans the inner duct walls while the vacuum system collects dust, reducing dust dispersion inside the duct and in the work area during cleaning.
3. 1080P video monitoring
Equipped with a 1080P video monitoring system, supporting video recording and photo capture, facilitating observation of the work process and retention of on-site visual documentation.
4. Forward/reverse rotation support
The flexible shaft supports forward and reverse rotation, allowing the working direction to be adjusted based on duct configuration and cleaning requirements.
5. Suitable for various duct configurations
Can be used for round, rectangular, horizontal, and vertical ducts with suitable configurations. Actual application should be determined based on duct dimensions, bends, and internal obstacles.
KT-836-A Main Technical Parameters
|
Technical Item |
Parameter |
|
Product Model |
KT-836-A |
|
Applicable Duct Diameter |
100–800 mm |
|
Power Supply |
220V |
|
Flexible Shaft Length |
15 m |
|
Main Unit Power |
2900W |
|
Maximum Airflow |
2000 m³/h |
|
Speed Range |
0–1000 rpm |
|
Rotation Direction |
Forward, reverse |
|
Video System |
1080P |
|
Video Functions |
Recording, photo capture |
|
Net Weight |
45 kg |
Note: Specific parameters may vary by version and configuration. It is recommended to confirm equipment configuration before purchase.
KT-836-A Application Scope
Central air conditioning branch duct cleaning.
Commercial complex ventilation duct cleaning.
Duct maintenance in hospitals, hotels, schools, and office buildings.
Round and rectangular ducts suitable for flexible-shaft brush operation.
Projects requiring video observation and cleaning process documentation.
4. What Cleaning Method Do the KT-832 and KT-836-A Use?
Both machines use flexible-shaft brush cleaning technology, and their basic working processes are similar.
Duct inspection: Confirm duct dimensions, shape, material, and internal structure.
Accessory selection: Select the flexible shaft and appropriately sized brush based on internal duct dimensions.
Equipment connection: Connect the flexible shaft to the equipment, and check brush installation and equipment operating status.
Duct cleaning: Start the equipment. The motor drives the flexible shaft to rotate, causing the front-end brush to clean the inner duct walls.
Dust collection: Based on equipment configuration and site conditions, use the vacuum system to collect dust.
Effect inspection: Confirm cleaning effectiveness through photos, videos, or other appropriate inspection methods.
The main differences between the two machines lie in applicable duct diameter range, equipment power, vacuum system configuration, and video monitoring functions—not in completely different cleaning principles.
5. How Should the KT-832 and KT-836-A Be Selected?
If the procurement project mainly involves small-diameter fresh air ducts, the KT-832 should be prioritized. If the project mainly involves central air conditioning branch ducts with a wider diameter range and requires video monitoring and integrated cleaning and vacuuming, the KT-836-A should be prioritized.
|
Procurement Requirement |
Recommended Model |
|
50–100 mm small-diameter fresh air ducts |
KT-832 |
|
100–200 mm fresh air ducts |
KT-832 or KT-836-A |
|
200–800 mm central air conditioning branch ducts |
KT-836-A |
|
Video monitoring and recording required |
KT-836-A |
|
Integrated cleaning and vacuuming configuration required |
KT-836-A |
|
Primarily small-diameter fresh air duct cleaning |
KT-832 |
For the overlapping 100–200 mm diameter range, it is recommended to provide duct photos, duct diameter, bend configuration, and on-site work requirements before purchase to confirm equipment and brush configuration.
If the business covers both small-diameter fresh air ducts and larger central air conditioning branch ducts, two machines can be configured based on project proportions to avoid a single machine being unable to handle certain special duct configurations.
6. What Issues Should Be Confirmed When Purchasing Duct Cleaning Equipment?
In addition to model and technical parameters, the following items should be understood before purchasing equipment:
1. Actual duct dimensions
Confirm the actual inner diameter of round ducts or the internal width and height of rectangular ducts. Do not rely solely on nominal dimensions on design drawings.
2. Duct configuration
Confirm whether continuous bends, tees, transitions, dampers, and other obstacles exist. These structures directly affect flexible shaft advancement and brush passage capability.
3. Duct material
Ducts of different materials have different requirements for brush hardness and cleaning force. Brush selection should avoid damaging the inner duct walls.
4. Dust collection method
Based on on-site contamination severity, duct configuration, and equipment configuration, confirm whether the vacuum system meets work requirements.
5. Video monitoring requirements
If the project requires observation of internal duct conditions and documentation of the cleaning process, the KT-836-A with video monitoring system can be prioritized.
6. Equipment configuration and after-sales service
Confirm flexible shaft length, brush specifications, vacuum accessories, video system, and consumable configuration. Also understand equipment operation training, technical guidance, and after-sales service.
7. Frequently Asked Questions About KT-832 and KT-836-A
Q1: What is the biggest difference between the KT-832 and KT-836-A?
The main differences are applicable duct diameter and functional configuration. The KT-832 is suitable for 50–200 mm small-diameter fresh air ducts. The KT-836-A is suitable for 100–800 mm ducts and is equipped with 1080P video monitoring and an integrated cleaning and vacuuming system.
Q2: Can the KT-832 clean central air conditioning ducts?
If the actual dimensions of central air conditioning branch ducts fall within the 50–200 mm range and the duct configuration allows the flexible shaft and brush to pass through, the KT-832 can be considered.
Q3: What duct size can the KT-836-A clean?
The KT-836-A is suitable for duct diameters of 100–800 mm. Actual use also requires confirmation based on internal duct dimensions, bends, tees, and brush configuration.
Q4: Do both the KT-832 and KT-836-A support forward/reverse rotation?
Yes. Both machines support forward and reverse rotation, facilitating adjustment of working direction based on actual cleaning conditions.
Q5: Can the KT-836-A video monitoring system record video?
Yes. The machine is equipped with a 1080P video monitoring system and supports video recording and photo capture for observing the cleaning process and retaining visual documentation.
Q6: If the flexible shaft is 15 m long, can it clean a duct 15 m deep?
Flexible shaft length does not equal actual effective cleaning distance. Duct bend severity, internal obstacles, flexible shaft advancement conditions, and brush specifications all affect actual working distance.
Q7: Can equipment configuration be customized based on duct dimensions at the time of purchase?
Equipment configuration and cleaning accessory selection can be discussed based on actual project conditions. It is recommended to provide duct dimensions, configuration, material, and on-site photos before purchase to confirm the applicable model and brush specifications.
8. KT-832 and KT-836-A Duct Cleaning Machine Manufacturer and Equipment Consultation
Anhui Kuaitong Pipeline Cleaning Technology Co., Ltd., established in 2009, is a technology-oriented enterprise specializing in the R&D, manufacturing, and sales of pipeline cleaning, unclogging, and inspection equipment. The company is a National High-Tech Enterprise, a Technology-Based SME, a Training Base of the China Industrial Cleaning Association, and an Anhui Province Specialized and Sophisticated Enterprise. It has provided solutions to more than 23,000 domestic and international enterprises.
The company provides a variety of equipment and supporting solutions for central air conditioning duct cleaning, central air conditioning water system cleaning, industrial pipeline cleaning and unclogging, and municipal pipeline inspection applications.
For product videos, detailed parameters, equipment quotations, and supporting accessories for the KT-832 Fresh Air Duct Cleaning Machine and KT-836-A Integrated Duct Cleaning and Vacuuming Machine, please contact the manufacturer. Equipment selection can be carried out based on actual project requirements.
Website: www.kuaitonggroup.com
Technical Consultation (Phone/WhatsApp/WeChat): +86 18226181287
This document is compiled by the technical team of Anhui Kuaitong Pipeline Cleaning Technology Co., Ltd.
Table of Contents
- 1. KT-832 vs KT-836-A Product Parameter Comparison
- 2. KT-832 Fresh Air Duct Cleaning Machine Product Introduction
- 3. KT-836-A Integrated Duct Cleaning and Vacuuming Machine Product Introduction
- 4. What Cleaning Method Do the KT-832 and KT-836-A Use?
- 5. How Should the KT-832 and KT-836-A Be Selected?
- 6. What Issues Should Be Confirmed When Purchasing Duct Cleaning Equipment?
- 7. Frequently Asked Questions About KT-832 and KT-836-A
- 8. KT-832 and KT-836-A Duct Cleaning Machine Manufacturer and Equipment Consultation


